emulsification machine

Mixing tank with dispering emulsification homogenizer, fat emusification mixing tank  

Mixing tank with dispering emulsification homogenizer, fat emusification mixing tank

 

High Shear emulsification can

High shear emulsification can is designed for mass production, using claw type with double absorbing charge bite structure, to avoid the upper material difficult to breathe and whirlpool phenomenon caused by the blind Angle. Stronger shear force improves the production efficiency and scattered emulsification quality. This equipment distributes a phase or more to another continuous phase, and in most cases each phase is insoluble to another. The rotating rotor making high speed and high frequency mechanical effect tangent offset by strong kinetic energy, thus making the solid phase, liquid, gas phase which are insoluble instantly uniform fine dispersions emulsification in the corresponding mature technology and additives under the common function. Through the cycle of high frequency reciprocating, finally obtained the stabile high quality products. 

Characteristic

The equipment has characteristics such as compact structure, small volume, light weight, easy operation, low noise and smooth operation, its biggest advantage is grind materials during the producing process, it can high-speed shear, mix, scatter, homogenize at the same time.

Technical parameter

Volume	300L	400L	500L	600L	800L	1000L	1500L	2000L	3000L
Body diameter(mm)	Φ800	Φ800	Φ900	Φ1000	Φ1000	Φ1000	Φ1200	Φ1300	Φ1600
Body height(mm)	600	800	800	800	1000	1220	1220	1500	1500
Motor power(kw)	3	3	4	4	5.5	7.5	7.5	11	15
Stirring speed(rpm)	1750r/min
Structure	Opening cover/inclined bottom

 

Notes:

1. The parameter above is standard, any special requirements please put forward.

2. The process parameters that need provided : the nature of material, working pressure, temperature, specific requirements, etc.

 

Technical requirements: 1. File support: the structural size drawing of the device (PDF) and instructions are available. 2. Required by operated function, the following criteria are adopted to design, manufacture and testA. << Standards for quality control of pharmaceutical production (Revised 1998)>> terms of Chapter IV 31-37;B. << The Steel Pressure Vessel (GB150-1998)>>;C. << The Steel Welding Normal Pressure Vessel (JB/T 4735-1997)>>;D. << Food Machinery Safety and Heath (GB 16798-1997)>>.

emulsification machine